| 型号 | Model | ZX-530 | |||
| 射胶系统 | Injection Unit | 单位 Unit | A | B | C |
| 射胶系统 Injection unit | |||||
| 螺杆直径 | Screw diameter | mm | 80 | 85 | 90 |
| 螺杆长径L/D | Screw L/D ratio | - | 22.3 | 21 | 19.8 |
| 理论射胶容积 | Theoretical shot volume | cm3 | 2287 | 2582 | 2895 |
| 射胶重量(PS) | Shot weight (PS) | g | 2104 | 2375 | 2663 |
| 射胶重量(PS) | Shot weight (PS) | oz | 74.4 | 83.9 | 94.1 |
| 螺杆行程 | Screw stroke | mm | 455 | ||
| 射胶压力 | Injection pressure | Mpa | 201 | 178 | 159 |
| 理论射胶速率 | Injection rate | g/s | 425 | 480 | 538 |
| 最大螺杆转速 | Max. screw speed | rpm | 140 | ||
| 锁模系统 Clamping Unit | |||||
| 锁模力 | Clamping force | KN | 5300 | ||
| 移模行程 | Toggle stroke | mm | 800 | ||
| 拉杆间距 (H*V) | Space between tie bars | mm | 860*810 | ||
| 最小模厚 | Min.mold thickness | mm | 330 | ||
| 最大模厚 | Max.mold thickness | mm | 830 | ||
| 顶出行程 | Hydraulic ejection stroke | mm | 225 | ||
| 顶出力 | Hydraulic ejection force | KN | 150 | ||
| 其他 Others | |||||
| 油压系统压力 | Hydraulic system pressure | Mpa | 17.5 | ||
| 油泵马达功率 | Pump motor power | kw | 55/65 | ||
| 电热量 | Heating capacity | kw | 34.9 | ||
| 邮箱容量 | Oil tank capacity | L | 1000 | ||
| 外形尺寸 | Machine dimensions | m | 9.1*2.1*2.5 | ||
| 理论机重 | Machine weight | Ton | 20 | ||
- EN