| 型号 | Model | ZX-300 | |||
| 射胶系统 | Injection Unit | 单位 Unit | A | B | C |
| 射胶系统 Injection Unit | |||||
| 螺杆直径 | Screw diameter | mm | 55 | 60 | 65 |
| 螺杆长径L/D | Screw L/D ratio | - | 22.9 | 21 | 19.4 |
| 理论射胶容积 | Theoretical shot volume | cm3 | 676 | 805 | 945 |
| 射胶重量(PS) | Shot weight (PS) | g | 615 | 732 | 860 |
| 射胶重量(PS) | Shot weight (PS) | oz | 21.8 | 25.9 | 30.4 |
| 螺杆行程 | Screw stroke | mm | 285 | ||
| 射胶压力 | Injection pressure | Mpa | 209 | 176 | 150 |
| 理论射胶速率 | Injection rate | g/s | 220 | 262 | 307 |
| 最大螺杆转速 | Max. screw speed | rpm | 195 | ||
| 锁模系统 Clamping Unit | |||||
| 锁模力 | Clamping force | KN | 3000 | ||
| 移模行程 | Toggle stroke | mm | 560 | ||
| 拉杆间距 (H*V) | Space between tie bars | mm | 625*575 | ||
| 最小模厚 | Min.mold thickness | mm | 200 | ||
| 最大模厚 | Max.mold thickness | mm | 610 | ||
| 顶出行程 | Hydraulic ejection stroke | mm | 135 | ||
| 顶出力 | Hydraulic ejection force | KN | 71 | ||
| 其他 Others | |||||
| 油压系统压力 | Hydraulic system pressure | Mpa | 17.5 | ||
| 油泵马达功率 | Pump motor power | kw | 30/37 | ||
| 电热量 | Heating capacity | kw | 18 | ||
| 邮箱容量 | Oil tank capacity | L | 450 | ||
| 外形尺寸 | Machine dimensions | m | 6.4*1.6*2.4 | ||
| 理论机重 | Machine weight | Ton | 8.5 | ||
- EN