| 型号 | Model | ZX-220 | |||
| 射胶系统 | Injection Unit | 单位 Unit | A | B | C |
| 射胶系统 Injection Unit | |||||
| 螺杆直径 | Screw diameter | mm | 45 | 50 | 55 |
| 螺杆长径L/D | Screw L/D ratio | - | 22 | 20 | 18 |
| 理论射胶容积 | Theoretical shot volume | cm3 | 442 | 546 | 660 |
| 射胶重量(PS) | Shot weight (PS) | g | 407 | 503 | 607 |
| 射胶重量(PS) | Shot weight (PS) | oz | 12.9 | 16.0 | 19.3 |
| 螺杆行程 | Screw stroke | mm | 278 | ||
| 射胶压力 | Injection pressure | Mpa | 207 | 168 | 139 |
| 理论射胶速率 | Injection rate | g/s | 162 | 200 | 243 |
| 最大螺杆转速 | Max. screw speed | rpm | 210 | ||
| 锁模系统 Clamping Unit | |||||
| 锁模力 | Clamping force | KN | 2200 | ||
| 移模行程 | Toggle stroke | mm | 520 | ||
| 拉杆间距 (H*V) | Space between tie bars | mm | 545*545 | ||
| 最小模厚 | Min.mold thickness | mm | 180 | ||
| 最大模厚 | Max.mold thickness | mm | 560 | ||
| 顶出行程 | Hydraulic ejection stroke | mm | 160 | ||
| 顶出力 | Hydraulic ejection force | KN | 67 | ||
| 其他 Others | |||||
| 油压系统压力 | Hydraulic system pressure | Mpa | 17.5 | ||
| 油泵马达功率 | Pump motor power | kw | 18.5/25.8 | ||
| 电热量 | Heating capacity | kw | 12.6 | ||
| 邮箱容量 | Oil tank capacity | L | 300 | ||
| 外形尺寸 | Machine dimensions | m | 5.6*1.4*2.0 | ||
| 理论机重 | Machine weight | Ton | 6.3 | ||
- EN